***** MAZDA Firmware ALERT *****
from JUNE 13, 2020.Recommend an online shop, the price is 90 USD, Mazda China OEM, price concessions easy to use
https://pl.aliexpress.com/item/1005001447097099.html?spm=5261.12278370.0.0.16df410c6aixwy



MAZDA (MZD) CONNECT, WHAT FIRMWARE DO I INSTALL..?

FOLLOW the .PDF INSTALLATION INSTRUCTIONS 100%.

*******************************
'.up' Firmware used for All MAZDA-MZD CONNECT MODELS from 2012-PRESENT.
**NOT For first production CX-5 or Mazda 6 with TomTom Navigation**.

*NOT For the all new MAZDA CX-30 (DM) and MAZDA 3 (BP) see the
"CONNECT II 2019~" Folder for their own '.kwi' firmware*.

*******************************

BEFORE you START, Switch CAR OFF,
Then Remove Navigation 'SD Card' and
LEAVE the SD Card OUT of the Car until the
FINAL File is Installed,
Then Car OFF again, then Insert SD Card.
Then start car.
The Navigation will work as normal when using CONNECT.
-------------------------------------

1. Your FIRST Install Procedure....:

IF YOUR MAZDA has old FIRMWARE VERSION ON or BELOW 30.00.000
LIKE 23.00.000 or 25.00.150 or 28.00.300 or 29.00.100C
THEN YOU *MUST* UPDATE with Version Number 31.00.100A FIRST.
THIS IS A ;TWO FILE; INSTALLATION FOR YOUR REGION or COUNTRY.

31.00.100A-FAILSAFE.UP
Then Install
31.00.100A-REINSTALL.UP

AFTER INSTALL RUN YOUR ''CONNECT'' IN CAR FOR A FEW MINUTES,
THEN SHUTDOWN CAR FOR THE NEXT VERSION TO INSTALL.
-------------------------------------
2. Your NEXT Install Procedure....::

IF YOUR MAZDA HAS FIRMWARE VERSION ON or BELOW 59.00.560A
LIKE 31.00.100A or 41.00.000 or 51.00.351 or
55.00.650 or 56.00.513 or 59.00.502A
THEN YOU *MUST* UPDATE with Verion Number 70.00.100A FIRST.
THIS IS A ;TWO FILE; INSTALLATION FOR YOUR REGION or COUNTRY.

70.00.100A-FAILSAFE.UP
Then Install
70.00.100A-REINSTALL.UP

AFTER INSTALL RUN YOUR ''CONNECT'' IN CAR FOR A FEW MINUTES,
THEN SHUTDOWN CAR FOR THE LAST VERSION TO INSTALL.
-------------------------------------
3. Your FINAL Install Procedure ....:::

IF YOUR MAZDA HAS FIRMWARE VERSION ON or ABOVE 70.00.021A
LIKE 70.00.100A or 70.00.110 or 70.00.130 or 70.00.150A or 70.00.335C
THEN YOU UPDATE to 70.00.367A for the LATEST FIRMWARE.

This is now a ;SINGLE FILE ONLY; INSTALLATION for
YOUR REGION or COUNTRY, MUST USE EITHER ONE of...

NA N_70.00.367A-UPDATE.UP
or
EU N_70.00.3xxx-UPDATE.UP
or
4A N_70.00.3xxx-UPDATE.UP

THIS IS THE LATEST FIRMWARE CURRENTLY AVAILABLE.

INSTALLATION AS PER INSTRUCTIONS IN SERVER
''MAZDA FIRMWARE UPDATE PROCEDURE WORLDWIDE'' .Pdf

-------------------------------------

ALL 70.00.xxxx FIRMWARE INCLUDES the Software for
CAR PLAY + ANDROID-AUTO....But...
For the CP/AA CONVERSION TO ACTUALLY WORK IN YOUR MAZDA
You MUST HAVE THE TWO ''GENUINE MAZDA PARTS'' INSTALLED
AFTER any 70.00.XXXX is installed and or WORKING in YOUR CAR FIRST.

More Information on How to get CP/AA Working Do the Following..
OPEN THE ''-CARPLAY-ANDROIDAUTO INSTALL'' FOLDER IN
THIS SERVER ON HOW TO DO THE GENUINE CONVERSION.

THERE ARE NO SHORT CUTS or OTHER BRAND PARTS...NONE, SO DO NOT ASK.

YOU MUST PURCHASE AND INSTALL THE TWO GENUINE MAZDA PARTS, LAST.

YOU CAN NOT SEPARATE THIS CARPLAY and or ANDROID-AUTO
PACKAGE AS THEY ARE BOTH INSTALLED WITH ALL 70.00.xxx FIRMWARE.

CARPLAY and ADROID-AUTO WILL NEVER WORK WITHOUT THE
TWO ''GENUINE MAZDA PARTS'' Finally INSTALLED Last...PERIOD.